Over 50 Years of Specialized Experience in the Industrial Filter Market

 INTRODUCING   T H E   N E W

FEATURES:                                        Benefits:
                  
           
LOWEST COST:                             NG 3500  is  designed  specifically  for  the  Oil  Heat Industry. The exclusive Nozzle                                                                Guard  design results in cost savings to you, when compared to other filters.

MORE MEDIA:                                  Nozzle  Guard  NG 3500  contains more filter media than competitive filters so filters
                                                              last longer. Up to 2.5 times more media than K10-size elements, 15% over R-size!

ROBUST NEW SHELL:                  New  heavy-gauge  single-piece,  flat-bottomed  shell  meets  DTOV2  Underwriters                                                                Laboratory  (UL)  requirements  for  corrosion  resistance.  Nozzle Guard  NG 3500                                                               utilizes Triple Corrosion Resistance  (DTOV2 epoxy  on zinc-plated steel shell, with                                                                 thick plastic lining on shell bottom), eliminating corrosion.
                                                                  
CLEANER QUICK                            Spin-on   NG 3500    makes   replacement    faster,   easier,   and   more   trouble   free;
CHANGE SPIN-ON:                         lowers service time & cost.

PREVENTS OIL SPILLS:               Replacing   the  spin-on   NG  3500  each  year  eliminates  the  problem  of  eventual
                                                              rusting-out of canister-type filters and oil spilling into a basement.

FLAT-BOTTOM DESIGN:             Nozzle Guard NG 3500 sits flat so it doesn’t tip over and spill contents. Inventory                                                                   stacks easily on shelves. Lower installed height.

STANDARD NG FEATURES:         Leak-proof   Triple Seal    (compression,  knife-edge,  and  constraining lip) between                                                                gasket  and  head;  Optional   Mounting  Bracket   (P/N  80001030)  to  fasten  head
                                                               securely to wall or appliance;  High  Efficiency  filter media; full  cULus certification                                                                in Canada and the U.S.A.

HIGH BURST PRESSURE:              Nozzle Guard NG 3500  has been hydrostatic pressure tested to 500 psi!

EASY RETRO-FIT:                            The NG 3500 will spin right on to an existing General 1A25A or Mitco 264 mounting
                                                               head, when fitted with a Nozzle Guard conversion adapter.

DIMENSIONS:      NOZZLE GUARD NG 3500


DESCRIPTION:     NOZZLE GUARD NG 3500

The Nozzle Guard NG 3500 filter is designed to be used as a fuel oil filter for mounting indoors in a heated space as close to the oil burner as practical.

In installations where water may be present (such as outdoor tanks which promote condensation), or high concentrations of heavy solids are expected, use a Nozzle Guard NG GWS water separator installed as close to the fuel tank as practical. Downstream, the NG 3500 uses High Efficiency pleated filter media to remove the particles from the fuel oil which may otherwise lodge in the nozzle and degrade system performance, or even plug the nozzle.

NG 3500 is designed with safety in mind, and is fully certified to safety codes in Canada (CSA B140.0-M87) and the U.S.A. (UL331). Features such as high (up to 160 psi) burst pressure, Triple-Seal gasketting, and a Mounting Bracket to eliminate mechanical loading on piping add to the security of using NG 3500. Three separate corrosion resistant coatings are used to protect the interior of the steel shell of NG 3500 from corrosive attack. And the spin-on design means the shell is changed annually so there is no re-used filter canister which will eventually rust and spill oil.

For new installations, use a Nozzle Guard aluminum mounting-head. Optional mounting bracket 80001030 allows the head to be attached to a wall or appliance for a professional looking installation.

For existing installations, easily retro-fit a General 1A25A or Mitco 264 head to accept an NG 3500 spin-on by installing a Nozzle Guard conversion adapter,  either  80001109  for  NG 3500-G ,  or  80001110 for NG 3500-M. The 1A25A head must also use gasket 80001244 to seal.

Click Here for Printable Version of this Page